basement finished! B+A's

Basement Reno- Final touches

the carpet was installed...


we chose a frize this time- its a bit of a shag:


installed the recessed light trim rings:


the fridge was delivered (its a bit short!):

we stained the island countertop a similar hue as the floor and we added towel bars to the sides:


curtain rods were hung:


the bed was delivered:


closet doors were hung-and painted:


closet organizer was installed:

basement renovation progress

the end is in sight...

the new back door (it just needs paint)

the previous door was alot smaller than a standard door size and so was the opening in the concrete wall. so we had to jack-hammer the concrete wall at the sill to get the new door to fit!

we installed the engineered oak floor and cabinet doors:

we put an electrical outlet inside the tall pantry cabinet so that we can put a microwave in there to save space on the counter.

we got an island from Ikea:

Scott sanded the butcher block top

a little before and "after"

the bathroom:

trim and paint

we installed the column wrap, chair rail and base in the bathroom...just needs some paint!



cutting trim in a confined space!

the wall color in this room is called 'stony path' by valspar


living room doors, baseboard, ceiling, wall paint...

these pre-hung doors come with brass hinges...we will switch them out with brushed nickel hinges

the new back door awaits installation (and the awol subcontractor!!!)



crown moulding installation has begun:

Progress

The bath vanity, beadboard and paint-
Vanity and top from Home Depot:


Wall paint color is called "Snow bell" by Glidden,
Floor tile is Cotto Duomo Grey from Home Depot:

Kitchenette cabinet boxes, sink, countertop and paint:

Laminate countertop from Lowe's (called Labrador Granite)

Sink by Kohler.

Stock cabinets by Home Depot (assembly required- similar to IKEA cabinets, drawer boxes are metal!)

Cabinet doors will be white shaker style,

wall paint color is "Bay Sands" by Valspar:

Armstrong "Tin Look" Ceiling Tiles ("Squares"):

Not easy to install...very fragile and pattern needs to align perfectly!

recessed can light:

walls are primed- the plaster work is impeccable!

(good work scott!!!)

bathroom floor + more...

we installed the electric radiant heat mat over 1/2" cement board over the concrete slab. we attached the cement board to the slab with thin-set mortar (the same stuff we use to install the tiles)-

normally, we would just install the tile directly to the slab, but we needed to raise the floor height to match the height of the neighboring room (where we installed the DriCore subfloor).

it also made the mat installation easier, because we could staple to the cement board.

tiling went smoothly; ceramic tile is so easy to score and snap- we didnt have to use the wet saw (which is messy and requires some serious clean-up time)

so now we wait 24 hours and then add the grout!

the ceiling tiles are awaiting installation, but we will first need to modify the existing ductwork in the ceiling so that we can get A/C into this new space.

mudding is complete!